*-------------*
* Inch-pound *
*-------------*
OO-D-2765
7 May 1991
SUPERSEDING
MIL-D-28561C(YD)
28 January 1985
FEDERAL SPECIFICATION
DITCHING MACHINES; LADDER-TYPE, LIGHT DUTY,
4-WHEEL-DRIVE, PNEUMATIC-TIRED, GED OR DED
This specification is approved by the Commissioner, Federal
Supply Service, General Services Administration, for the use
of all Federal agencies.
1. SCOPE AND CLASSIFICATION
1.1 Scope. This specification covers self-propelled, 4-wheel-drive
pneumatic-tired, gasoline or diesel engine-driven, ladder type ditching
machines.
1.2 Classification. The ditching machines shall be of the following sizes,
as specified (see 6.2).
Size A - Minimum 2100 pounds (lbs) basic unit weight; not less than
18 horsepower (hp).
Size B - Minimum 3000 lb basic unit weight; not less than 30 SAE-HP.
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications and standards. The following specifications and
standards form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of these documents are those listed in the issue
of the Department of Defense Index of Specifications and Standards (DODISS) and
supplement thereto, cited in the solicitation (see 6.2).
*-----------------------------------------------------------------------------*
*Beneficial comments (recommendations, additions, deletions) and any pertinent*
*data which may be of use in improving this document should be addressed to: *
*Commanding Officer (Code 156), Naval Construction Battalion Center, Port *
*Hueneme, CA 93043-5000, by using the self-addressed Standardization *
*Document Improvement Proposal (DD Form 1426) appearing at the end of this *
*document or by letter. *
*-----------------------------------------------------------------------------*
AMSC N/A FSC 3805
DISTRIBUTION STATEMENT A. Approved for public release; distribution is
unlimited.
Downloaded from http://www.everyspec.com
