I INCH-POUND I
FF-P-2827
AMENDMENT -2
June 3. 1994
SUPERSEDING
I
Amendment -1
March 25, 1994
FEDERAL SPECIFICATION
PADLOCK , KEY OPERATED, GENERAL FIELD SERVICE
‘fhisamendment, which forms a part of FF-P-2827, dated June 18, 1993,
is approved by the Commissioner,
Federal Supply Service, General Services
Administration, for the use of all Federal agencies.
Pa~e 1
* 1.2 Change to read:
“1.2 Classification.
The padlocks covered by this
specification shall be Size A Types 1,
2, and 3; and Size B Types 1, 2, and 3 as
specified (see 1.2.1 and 3.2).”
1.2.1 Change to read:
“1.2,1 Size and tvpe. The size shall be determined
by the shackle stock diameter,
and the type shall be determined by keying
requirements :
Size
Size
A - Shackle diameter, 0.375 tO.020 inch (10 io.51 INU)nOminal.
Type 1 - Individual lock (no master keying)
Type 2 - Master keyed sets.
Type 3 - Keyed alike sets.
B - Shackle diameter, 0.500 ~0.020 inch (13 fO.51 mm) nominal.
Type 1 -
TyPe 2 -
Type 3 -
Individual lock (no master keying)
Master keyed sets
Keyed alike sets “
IBeneficial comments (recommendations, additions,
deletions) and any pertinent I
Idata which may be of use in improving this document should be addressed to: I
lCommanding Officer (Code 156) ,
Naval Construction Battalion Center,
I
11000 23rd Avenue, Port Hueneme,
CA 93043-4301, by using the Standardization I
lDocument Improvement Proposal (DD Form 1426) appearing at the end of this I
Idocument or bv letter.
I
AMSC N/A
FSC 5340
DISTRIBUTION STATEMENT A. Approved for public release; distribution is
unlimited.
Downloaded from http://www.everyspec.com
