EEEmiil
.J-Wl177/23B
June 10, 1988
SUPERSEDING
,,
●
●
.J-W-1177/23A
September 27, 1976
FEDERAL SPECIFICATION SHEET
WIRE , MAGNET, ELECTRICAL, CLASS 200, TYPE CK,
CLASS-FIBER-COVERED, SILICONE TREATED, KSCTANCULAR
This specification is approved by the Commissioner, Federal Supply Service ,
Ceneral Services Administration,
for the use of all Federal agencies.
The requirements for acquiring the wire described herein shall consist of this
specification and the
Classification:
latest issue of J-W-1177.
class 200;
type G2K (bare with double glass fiber, silicone
varnished) ,
type H2GK and type H2C2K (heavy film, single or
dOuble glass fiber, silicone varnished);
rectangular.
Insulating ❑aterials:
The fiber covering and application of the covering
shall be as specified in J-W-1177. If an under-
lying film coating is used, it shall have a class
180 rating. The varnish used in treating fibrous
covered wire shall conform to the requirements of
class 200 of MIL-I-24092, or an alternate selected
on the basis of service experience or equivalent
test data.
The varnish shall be a modified silicone
insulating varnish or silicone compound to provide
a tough outer finish.
The varnish used shall be
identified in the qualification test report.
NEMA/ANSI equivalent: All test requirements are equivalent
to MU-43 of
NENA NW 1000.
General requirements : See J-W-1177 for general requirements , quality
aesurance provisions, and packaging.
AMSC NjA
FSC 6145
DISTRIBUTION STATEMENT A Approved for public release; distribution unlimited
●
lof8
Downloaded from http://www.everyspec.com
