*------------*
* INCH-POUND *
*------------*
OO-A-374C
March 28, 1995
--------------
SUPERSEDING
00-A-374B
December 21, 1988
FEDERAL SPECIFICATION
AIR CONDITIONERS WITH REMOTE CONDENSING UNITS
OR REMOTE AIR-COOLED, AND WATER-COOLED CONDENSER UNITS, UNITARY
This specification is approved by the Commissioner, Federal
Supply Service, General Services Administration, for the use
of all Federal agencies.
1. SCOPE AND CLASSIFICATION
1.1 Scope. This specification covers factory-made air conditioners with
remote condensing units or condensers. The separate assemblies should be
designed to be used together with matched assemblies of the same manufacturer,
and be rated and tested in accordance with Air-conditioning and Refrigeration
Institute (ARI) Standards. When required, provisions for heating and
humidification may be supplied.
1.2 Classification. Air conditioners should be of the following types,
styles, classes, and arrangement, as specified (see 6.2).
Type I, ARI Classification RCU-A-CB:
Evaporator-blower unit and remote air-cooled condensing unit with capacities
to 720,000 British thermal units per hour (Btu/h) (211,010 watt (W))
Type II, ARI Classification RCU-W-CB:
Evaporator-blower unit and remote water-cooled condensing unit with
capacities to 720,000 Btu/h (211,010 W).
*-----------------------------------------------------------------------------*
*Beneficial comments (recommendations, additions, deletions) and any pertinent*
*data which may be of use in improving this document should be addressed to: *
*Commanding Officer (Code 156), Naval Construction Battalion Center, *
*1000 23rd Avenue, Port Hueneme, CA 93043-4301, by using the Standardization *
*Document Improvement Proposal (DD Form 1426) appearing at the end of this *
*document or by letter. *
*-----------------------------------------------------------------------------*
FSC 4120
DISTRIBUTION STATEMENT A. Approved for public release; distribution is
unlimited.
Downloaded from http://www.everyspec.com
