*------------*
* INCH-POUND *
*------------*
GG-M-2802
July 15, 1993
-------------
SUPERSEDING
MIL-M-18294D
16 November 1987
FEDERAL SPECIFICATION
METERS, FLUID QUANTITY VOLUMETRIC
This specification is approved by the Commissioner, Federal
Supply Service, General Services Administration, for the use
of all Federal agencies.
1. SCOPE AND CLASSIFICATION
1.1 Scope. This specification covers volumetric meters comprising: (1)
measuring elements that meter the fluid in successive and individual
quantities, and (2) registering elements that indicate the total fluid
quantity passing through the meter since the last reading.
1.2 Classification. Unless otherwise specified (see 6.2), meters covered
by this specification are classified by type, indicating fluid for which meter
is designed, and style, indicating type of metering action, in accordance with
the following, and by size in accordance with table I.
Type C - Condensate usage
Type F - Fuel usage
Type G - Gas usage
Type W - Water usage
Style A - Oscillating piston or nutational disk
Style B - Bellows or diaphragm
Style C - Rotating drum
*----------------------------------------------------------------------------*
* Beneficial comments (recommendations, additions, deletions) and any *
* pertinent data which may be of use in improving this document should be *
* addressed to: Commanding Officer (Code 156), Naval Construction Battalion *
* Center, 621 Pleasant Valley Road, Port Hueneme, CA 93043-4300, by using *
* the Standardization Document Improvement Proposal (DD Form 1426) appearing *
* at the end of this document or by letter. *
*----------------------------------------------------------------------------*
FSC 6680
DISTRIBUTION STATEMENT A. Approved for public release; distribution is
unlimited.
Downloaded from http://www.everyspec.com
