INCH-POUND
MIL-DTL-3655D
2 July 2004
SUPERSEDING
MIL-C-3655C
11 April 1980
DETAIL SPECIFICATION
CONNECTOR, PLUG AND RECEPTACLE, ELECTRICAL (COAXIAL, SERIES TWIN),
AND ASSOCIATED FITTINGS,
GENERAL SPECIFICATION FOR
This specification is approved for use by all Depart-
ments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope
. This specification covers the general requirements for series twin, coaxial connectors and
associated fittings (see 6.1).
1.2 Classification
. Connectors and associated fittings are of the following classes (see 3.1).
Class I - Weatherproof
Class II - Non-weatherproof
1.3 Part or Identifying Number (PIN)
. The PIN consists of the letter “M” followed by the specification
number, the associated slash sheet number and the sequentially assigned dash number (see 3.7.1).
M3655
/1 - 0001
Sequentially assigned dash number
Specification sheet
Basic specification
2. APPLICABLE DOCUMENTS
2.1 General
. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
Comments, suggestions, or questions on this document should be addressed to: Defense Supply Cente
Columbus, ATTN: VAI, P.O. Box 3990, Columbus OH 43218-3990 or email to
RFconnectors@dscc.dla.mil Since contact information can change, you may want to verify the currency
of this address information using the ASSIST Online database at
http://www.dodssp.daps.mil.
AMSC N/A FSC 5935
Downloaded from http://www.everyspec.com
